Sliding Aluminium Track Roller Ballroom Sliding Wall Partitions / Acoustic Room Dividers

Acoustic Room Divider Sliding Aluminium Track Roller Ballroom Sliding Wall Partition

Description:

Sliding Partition Walls, the flexible space configuration, with little effort rooms can be partitioned, made smaller or larger to suit individual requirements, from conference rooms, school classrooms to large exhibition halls.

Options include single or double inset pass doors, glazing panels, virtually unlimited track arrangements and surface finishes, with melamine probably being the most popular.

Technical information:

Advantage:

1. No need floor suspension: There is no track on the floor, just install the track on the ceiling;

2. Stable and safe: It is stable and reliable after being cut off, and it is not easy to swing;

3. Soundproof and environmental protection: sound insulation effect is good, the maximum sound insulation coefficient can reach 53 dB;

4. Insulation and energy conservation: excellent insulation performance, according to different seating rates, the large space is divided into small spaces to reduce the air conditioning power consumption;

5.High-efficiency fire prevention: The use of high-efficiency fireproof materials, good fireproof performance;

Feature:

Hinged pair panels for quick and easy operation.

Robust aluminum frame construction for demanding environments.

Room divider wide range of surface finishes.

Partial and fully operating panels available.

Partition divider just only top hung supported without floor track.

Sliding partition wall application:

At present, movable partition and fixed partition series products are widely used in hotels, hotels, multi-purpose halls, conference rooms, banquet halls, office buildings, exhibition halls, financial institutions, government offices, hospitals, factories and other occasions.

Our service:

1. Before the installation of the movable partition, check the track on which the track parts are assembled on the floor in order;

2. Mark the track line and the mounting bracket at a specific location;

3. Install the movable partition rail bracket to the ceiling;

4. Check whether the movable partition is firmly fixed on the rail. When the rail and the bracket must be loosely stored in the storage area, the bracket plate can be moved to other places;

5.The appropriate position of the storage track is measured before the facility of the main track. This is very important for the placement of intersections in order to continue the installation of the following active partitions;